1998-02 TOYOTA COROLLA |
||||||||||||||||||||||||
|
1. Here's what you're looking at. |
 |
|
2. First, remove the shift Knob, turning it counter-clockwise. |
 |
|
3. Lift up on the edge of the shift boot closest to the climate control as shown on the picture
*CAUTION TRYING TO PULL IT FROM THE BACK TO THE FRONT COULD DAMAGE YOUR PART!* |
 |
|
4. Remove the shift boot assembly and remove the plastic base. |
 |
|
5. The plastic base. |
 |
|
6. Look for the smaller of the two side and put the plastic base according to the larger. |
 |
|
7. Just like this: |
 |
|
8. Start gluing the two sides and after the front and the rear and cut, a little where are the feet. |
 |
|
9. Glue the smaller sides after the longer ones stick. |
 |
|
10. Reinstall everything in the reverse order of removal. |
 |
|
ENJOY YOUR NEW LEATHER BOOTS! |
|
|
Useful tip You have installed a product made out of genuine leather. As you know, to maintain a leather product in good condition, you should take care of it. We suggest occasionally (every 4-6 week for example) applying some leather conditioner/UV protector to keep your leather from drying up in the sun and cracking. |
|
Subscribe to our newsletter to get an instant 20% discount!
