1997-99 MERCURY TRACER
shift boot installation guide

Looking for a Mercury Tracer shift boot? We offer the best ones out there!

97-99 TRACER INSTALLATION INSTRUCTIONS


1. Remove the plastic pins from the sides of the center console.

2. Remove the screws or pins located on the left and right of the front part of the center console.

3. Remove the shift knob by unscrewing it anticlockwise.

4. Remove both parts of the center console from the car.

5. Flip the front part upside down and remove the four screws holding down the mounting frame.

6. Remove the old shift boot by sliding it off the tabs. Put the new shift boot on them instead, making sure you get the alignment right against the edges of the console.

7. Re-install everything in the reverse order of removal.

 

CONGRATULATIONS - YOU HAVE SUCCESSFULLY INSTALLED YOUR NEW LEATHER BOOTS!

    

Useful tip

You have installed a product made out of genuine leather. As you know, to maintain a leather product in good condition, you should take care of it. We suggest occasionally (every 4-6 week for example) applying some leather conditioner/UV protector to keep your leather from drying up in the sun and cracking.

Redline Automotive Accessories Corp. will not be held liable for any labor, incidental or consequential damages of any kind. Proceed at your own risk. 

Copyright RedlineGoods.com. All rights reserved.

Save 20% today!

E-mail:

Please subscribe to our newsletter.

Get an instant 20% discount and enter our montly $100 CASH sweepstakes!

Get discount
Skip